Daylight Into a Workshop Roof
Translucent strips set into the roof run, following the same profile as the sheets.
You can transform a working building with daylight without turning the roof into glass. Translucent sheets in the matching profile land on the same purlins, close into the same laps, and spread soft light down the length of the interior.
Around 10% of the roof area is a common working figure, spread evenly rather than grouped. Two things to get right: use larger washers and slightly oversized fixing holes, because GRP moves far more than steel does with temperature.
Products used
Add the lot in one go, then set the quantities you need.
130º Ridge Flashings in PVC Plastisol Finish 3m
130-Ridge-Flashings-in-PVC-Plastisol-Fin
Price on application
